POLARIZING BEAM SPLITTER(PBS-HP)

The High Power PBS uses a special Optical Contacted technology, that is, optical bonding technology, its biggest advantage is that the mechanical strength after bonding is larger, the damage threshold is higher, which also means that the bonded product can be cut, polished, coated, coated and bonded, etc., without considering the impact of high temperature and high laser power on itself. Because there is no glue inside the High-Power PBS, the bonding face has almost no absorption of the laser, and the bonding surface will not be damaged due to high temperature.

Keywords:

Keywords:

POLARIZING BEAM SPLITTER(PBS-HP)


Basic Parameters

The High Power PBS uses a special Optical Contacted technology, that is, optical bonding technology, its biggest advantage is that the mechanical strength after bonding is larger, the damage threshold is higher, which also means that the bonded product can be cut, polished, coated, coated and bonded, etc., without considering the impact of high temperature and high laser power on itself. Because there is no glue inside the High-Power PBS, the bonding face has almost no absorption of the laser, and the bonding surface will not be damaged due to high temperature.

 

Processing Index:

Specification Single Wavelength Broadband Wavelength
Wavelength

 

355, 532, 633, 808, 880, 1064, 1310, 1550

450-650nm, 650-950nm

900-1200nm, 1200-1600nm

Extinction Ratio >2000:1 >1000:1
Surface Quality 40/20, 20/10
Beam Deviation < 3 arc minutes
TWD <λ/4@633nm
Transmission Tp>95%, Ts<0.1%
Coating

PBS+AR Coating

LIDT >15J/cm2@1064nm, 20ns, 20Hz

 

Single Wavelength Standard Product:

Type/Type

Wavelength/Wavelength

Extinction Ratio/Extinction Ratio

Material/Material

Dimension(mm)/Dimension(mm)

HPPBS510

355, 532, 633, 808, 880, 1064, 1310, 1550

 

>2000:1

 

K9/BK7

UVFS

10.0*10.0*10.0

HPPBS512

12.7*12.7*12.7

HPPBS515

15.0*15.0*15.0

HPPBS520

20.0*20.0*20.0

HPPBS525

25.4*25.4*25.4

 

Broadband Wavelength Standard Product:

Type/Type Wavelength/Wavelength Extinction Ratio/Extinction Ratio Material/Material Dimension(mm)/Dimension(mm)
HPPBS210

450-650nm

650-950nm

900-1200nm

1200-1600nm

>1000:1 H-ZFX 10.0*10.0*10.0
HPPBS212 12.7*12.7*12.7
HPPBS215 15.0*15.0*15.0
HPPBS220 20.0*20.0*20.0
HPPBS225 25.4*25.4*25.4

 

 

 

 

Solutions

Scientific research and testing field

Scientific research and testing field

Aviation field

Aviation field

Medical cosmetology field

Medical cosmetology field

Laser field

Laser field

Related Products

YVO4

Yttrium alumate (YVO4) is an excellent birefringent crystal material, which is a negative uniaxial crystal. The crystal has good physical and mechanical properties, wide light transmission range, high transmittance, large birefringence coefficient and easy processing. YVO4 crystal can replace ice SPAR and crystal red stone in the field of optical fiber communication, is the key material in optical communication passive devices such as optical isolators, circulators, polarization splitters, polarizers.


Caicite

Caicite Crystal is a kind of natural birefringent material, in the shape of diamond, birefringence coefficient is large, through the spectrum is wide, from visible to near infrared has relatively good optical properties. Although the mechanical strength of Iceland SPAR material is soft and easy to scratch, it still does not affect its wide application in polarization devices. Caicite is mainly used in Glan POLARIZER.


LiNbO3

LiNbO3 is widely used in optical fiber communication as a birefringent crystal. The crystal has good physical and mechanical properties, wide light transmission range, high transmittance, easy processing, and lower material cost than other materials. Lithium niobate crystals are widely used in passive optical communication devices such as optical isolators, circulators, polarization splitters, polarizers, etc


POLARIZING BEAM SPLITTER(PBS)

The polarization splitter prism is plated with a multilayer film structure on the inclined surface of the right Angle prism, and then glued into a cube structure. By taking advantage of the property that the transmission rate of P-polarized light is 1 and that of S-polarized light is less than 1 when the light incident at Brewster Angle, the P polarization component can be completely penetrated after the light passes through the multilayer film structure at Brewster Angle for many times. And most of the S polarization component is reflected. Note: Specific bands and extinction ratios can be customized according to customer requirements.


Product Inquiry

*Note: Please be sure to fill in the information accurately and keep the communication open. We will contact you as soon as possible.

Submit